SUPER QUIET AND EASY TO MAINTAIN
Our Magnum Pumping Stations run quietly and smoothly with little vibration for less wear and tear on equipment and operators. They’re powerful too, providing a superior quality high-pressure car wash pumping station for all system needs, from 8 to 35 GPM.
- MacNeil’s patented Isolastic Suspension eliminates damaging vibrations and reduces backroom noise
- Laser straight belt tensioning system provides control over belt alignment, and reduces belt wear
- The Magnum car wash pumping station can be operated with fresh or reclaimed water
- Requires minimal backroom space
FEATURES:
- High-pressure equipment system supply
- Output capacity of up to 35 GPM
- 50 U.S. gallon water capacity
- Low water level sensor
- Operates with fresh or recycled water
- In-line strainer to protect pump and prevent clogging
- Automatic fill valve
- Overflow manifold mounted to tank to keep motor dry in case of overflow
- Separate structure for tank and pump with electric motor for better vibration control
- Patented Isolastic Suspension eliminates damaging vibrations and reduces back-room noise
- Laser-straight belt tensioning system controls over belt alignment, reducing belt wear
- State-of-the-art, all-plastic, corrosive-proof float valve
- Requires minimal backroom space
TECHNICAL DATA:
M1000R:
Electrical Motor:
- 230/460 VAC, 60 Hz
- Rated output = 7.5 HP
- Full load speed = 1760 RPM
- Three-phase, four pole
- Continuous duty
System Pump:
- Max speed capacity = 1450 RPM
- Max flowrate = 8 GPM
- Delivery at max PSI = 185 REV./USG
- Max inlet pressure = 250 PSI
- Max discharge pressure = 1000 PSI
- 1” NPT inlet port
- ¾” NPT discharge pump
Water:
- 1/2″ high-pressure system line
- 1″ overflow line
- 3/4″ unloader line to break
- 1” pump inlet line
M2000R 20 GPM 15 HP:
Electrical Motor:
- 230/460 VAC, 60 Hz
- Rated output = 15 HP
- Full load speed = 1760 RPM
- Three-phase, four pole
- Continuous duty
System Pump:
- Max speed capacity = 1150 RPM
- Max flowrate = 20.2 GPM
- Delivery at max PSI = 57 REV./USG
- Max inlet pressure = 250 PSI
- Max discharge pressure = 1000 PSI
- 1 ½” NPT inlet port
- 1” NPT discharge port
Water:
- 1” high-pressure system line
- 1” overflow line
- ¾” unloader line to break
- 2” pump inlet line
M3500R 35 GPM 25 HP:
Electrical Motor:
- 575 VAC, 60 Hz
- Rated output = 25 HP
- Full load speed = 1770 RPM
- Three-phase, four pole
- Continuous duty
System Pump:
- Max speed capacity = 1150 RPM
- Max flowrate = 34.5 GPM
- Delivery at max PSI = 29 REV./USG
- Max inlet pressure = 250 PSI
- Max discharge pressure = 1000 PSI
- 2 ½ ” NPT inlet port
- 1 ¼ ” NPT discharge
Water:
- 1” high-pressure system line
- 1” overflow line
- ¾” unloader line to break
- 2 X 2” pump inlet line