Clean Hard-to-Reach Areas Effectively and Safely

Cleaning the tops of cars, SUVs, vans and pickups can prove to be a difficult task if you want it done well. While some mitters claim to take care of this, the RS-1000 easily outperforms these while also getting rid of windshield eyebrows and cleaning front grills and even upper rear windows—and yes, this includes SUVs, vans and pickup trucks too.

Now imagine harnessing this cleaning power and doubling it. It’s possible—because of the single-leg design of the RS-1000 tunnel car wash brush—by installing two counter-rotating brushes. It’s the most powerful piece of top-cleaning equipment on the market today!

The RS-1000 tunnel car wash brush is now available with the Evolution Top Reach foaming manifold too, giving you the ability to create a dramatic foam show for your customers while also saving on tunnel space.

The RS-1000 Evolution Top Brush also:

  • Cleans tough areas like roof racks and back spoilers, while being gentle on antennas, grills, wipers and other vehicle extrusions
  • Is gentler and quieter than mitters, with more cleaning power
  • Utilizes a single-leg design to take up minimal space and allows for installation of dual counter-rotating brushes
  • Makes it ideal for both retrofits and new sites, with quick and easy installation for minimal downtime
  • Produces a sparkling finish using safe, quiet and long-lasting Envirosoft® foam, available in a variety of attractive colors and patterns

FEATURES:

  • Envirosoft® foam available in a variety of colors and patterns
  • Cantilever design can be mounted on either side of wash bay
  • Maintenance-free Pro-Coat finish
  • Optional auto retract kit for pickup truck detection
  • Optional counter-rotating dual brush
  • Low cleaning pressures and cushion cylinders reduce wear and tear on the equipment
  • Electric or hydraulic drive
  • Stainless-steel bearings and hardware
  • One-year manufacturer warranty

TECHNICAL DATA:

Water:

  • ¾" line
  • 40 PSI (2.8 BAR) min. pressure
  • 2 GPM (7.6 LPM)

Variable Frequency Drive:

  • 200 VAC, 60 Hz
  • Single Phase—0.75 kW

Pneumatics:

  • ¼" (6.35mm) line
  • 0.05 CFM (0.014 cu m/min.)
  • 100 PSI (6.9 BAR)

Hydraulics(Optional Drive):

  • 4.5 GPM (17 LPM)
  • 800–900 PSI (55–62 BAR)

Motor:

  • 208/230/460 VAC, 60 HZ
  • 3 Phase—0.9 kW

Control Voltage:

  • 24 VAC

Clean Hard-to-Reach Areas Effectively and Safely

Cleaning the tops of cars, SUVs, vans and pickups can prove to be a difficult task if you want it done well. While some mitters claim to take care of this, the RS-1000 easily outperforms these while also getting rid of windshield eyebrows and cleaning front grills and even upper rear windows—and yes, this includes SUVs, vans and pickup trucks too.

Now imagine harnessing this cleaning power and doubling it. It’s possible—because of the single-leg design of the RS-1000 tunnel car wash brush—by installing two counter-rotating brushes. It’s the most powerful piece of top-cleaning equipment on the market today!

The RS-1000 tunnel car wash brush is now available with the Evolution Top Reach foaming manifold too, giving you the ability to create a dramatic foam show for your customers while also saving on tunnel space.

The RS-1000 Evolution Top Brush also:

  • Cleans tough areas like roof racks and back spoilers, while being gentle on antennas, grills, wipers and other vehicle extrusions
  • Is gentler and quieter than mitters, with more cleaning power
  • Utilizes a single-leg design to take up minimal space and allows for installation of dual counter-rotating brushes
  • Makes it ideal for both retrofits and new sites, with quick and easy installation for minimal downtime
  • Produces a sparkling finish using safe, quiet and long-lasting Envirosoft® foam, available in a variety of attractive colors and patterns

FEATURES:

  • Envirosoft® foam available in a variety of colors and patterns
  • Cantilever design can be mounted on either side of wash bay
  • Maintenance-free Pro-Coat finish
  • Optional auto retract kit for pickup truck detection
  • Optional counter-rotating dual brush
  • Low cleaning pressures and cushion cylinders reduce wear and tear on the equipment
  • Electric or hydraulic drive
  • Stainless-steel bearings and hardware
  • One-year manufacturer warranty

TECHNICAL DATA:

Water:

  • ¾" line
  • 40 PSI (2.8 BAR) min. pressure
  • 2 GPM (7.6 LPM)

Variable Frequency Drive:

  • 200 VAC, 60 Hz
  • Single Phase—0.75 kW

Pneumatics:

  • ¼" (6.35mm) line
  • 0.05 CFM (0.014 cu m/min.)
  • 100 PSI (6.9 BAR)

Hydraulics(Optional Drive):

  • 4.5 GPM (17 LPM)
  • 800–900 PSI (55–62 BAR)

Motor:

  • 208/230/460 VAC, 60 HZ
  • 3 Phase—0.9 kW

Control Voltage:

  • 24 VAC